| |
| |
Back |
|
|
Rear Tie Down Systems |
|
| |
Ford
Trucks |
GM
& Chev Trucks |
Dodge
Trucks |
Other |
|
| |
|
Ford Trucks |
|
3013 - Split Mount |
| |
Fits: 1993 to 1996 F150, F250 and F350; 1997 and 1998 F250 and F350 Ford
vehicles with HEAVY DUTY FRAMES. Will not fit vehicles with factory
installed hitch receivers. |
| |
|
| |
3017 - Split Mount |
| |
Fits: 1998 to 2003 F150, F150 7700 series and F250 Ford vehicles with LIGHT
DUTY FRAMES equipped with a factory installed hitch receiver. WILL NOT FIT HEAVY
DUTY FORD VEHICLES. Shipping weight: 17.6 lbs. (See part number 3032.) |
| |
|
|
| |
3031 - Split Mount |
 |
| |
Fits: 1997 to 2003 F150 and F250
Ford vehicles with LIGHT DUTY FRAMES. For use on vehicles where no hitch
receiver is installed. 24.5 lbs. |
| |
|
|
| |
3032 - Split Mount |
 |
| |
Fits: 1999 to 2006 F250 and F350
Super Duty FORD
vehicles with factory installed 2.5" & 3" square hitch receivers. WILL NOT FIT
LIGHT DUTY FORD VEHICLES. See part #
3017. |
| |
|
|
| |
GM & Chev Trucks |
|
| |
3011 - Split Mount |
 |
| |
Fits: 1988
to 2003 Chevrolet and GMC vehicles where no hitch receiver has been
installed.
Shipping weight: 23 lbs. |
| |
|
|
| |
3041 - Split Mount |
|
| |
Fits:
1999 to 2006 and 2006 carry-over Chev and GMC vehicles
round tubular hitch. Will also fit other similar makes of hitches. Some
modification may be required. Shipping weight: 7.9 lbs. |
| |
|
|
| |
Dodge Trucks |
|
| |
3006 - Split Mount |
|
| |
Fits: 1998 to 2002 full size
Dodge trucks equipped with
factory
installed hitch receivers. Shipping weight: 15.4 lbs. |
| |
|
|
| |
3012 - Split Mount |
 |
| |
Fits: 1993 to 2002 full size
Dodge vehicles. Recommended for use where no hitch receiver has been
installed. Shipping weight: 22 lbs. |
| |
3043 - Split Mount |
|
| |
Fits: All models
2004 - 2007 Dodge 1/2 to 1 ton trucks with or without a receiver installed. |
| |
Other |
|
| |
3000 - Receiver Mount |
|
| |
Fits:
This tie down is universal. It will fit any vehicle equipped with a 2" hitch
receiver. Simply slide it in as you would a ball mount, and install your
locking pin. This system still allows you to pull a trailer (up to a maximum of 2000 lbs.) The
MAXIMUM TONGUE WEIGHT IS NOT TO EXCEED
200 LBS. |
| |
|
| |
3033 - Split Mount |
 |
| |
Fits:
Most aftermarket and some factory installed hitch receivers with straight
2.5" and 3" main bars. Shipping weight: 25.3 lbs. |
| |
|
|
| |
3040 - Split Mount |
 |
| |
Fits:
This tie down is designed to fit most bolt together, aftermarket hitch receivers.
This tie down utilizes the existing holes located at each end of the
receiver. Shipping weight: 20.9 lbs. |
| |
|
