| |
|
|
| |
Roof Racks for
Campers &
Fibre Glass Truck
Tops/Truck Caps/and Tent Trailers |
| |
|
|
| |
Campers |
|
| |
2002 |
|
|
 |
The 2002 is designed to carry
evenly distributed loads of up to 200 lbs. For installation on truck campers, tent
trailers, travel trailers & fifth wheel trailers which have square corners.
The rack is adjustable for roofs up to 8' in width. Anchoring to the RV is
accomplished with lag screws and hex caps which are included. Powder coated
all for a more durable finish. Shipping weight: 22 lbs. |
| |
|
|
|
| |
Fibre Glass Canopies/Truck Caps |
| |
 |
|
2003: This
roof rack is designed to fit fibreglass truck caps which require a higher clearance than
normal. The maximum distributed weight for this rack is 125 lbs. The rack is
72" wide, but may be cut down for narrower applications. Four, 11" towers
are included. Powder coated. Shipping weight: 14.3 lbs. |
|
Shown: 2004. Similar for 2003 & 2005 |
| |
|
|
2004: This roof rack is
designed to fit fibreglass truck caps which do not require a higher than
normal clearance. The maximum distributed weight for this rack is 125 lbs.
The rack is 72" wide, but may be cut down if a smaller width is required.
Four, 8" towers are included. Powder coated. Shipping weight: 13.75 lbs. |
| |
|
|
|
| 2005: This roof rack is
designed to fit fibreglass truck caps which require a different height from
the front to the
rear. The maximum distributed weight for this rack is 125
lbs. The rack is 72" wide, but may be cut down if a smaller width is
required. Two, 8" and two, 11" towers are included. Powder coated.
Shipping weight: 14.1 lbs. |
